ALL METAL VERSION Complete Artillery Hotend/extruder. X2 & Genius Pro
Complete ready to bolt on ALL METAL extruder and hotend.
Alloy idler arm.
Bi-metal Ti or Full Titanium heatbreak**.
Hardened steel nozzle or Plated Copper Nozzle
All fans, wires etc installed. True plug and play. Ideal for swapping nozzle size etc.
Compatible with X2 and Genius Pro
24mm Pancake Stepper Motor (1)
Extruder PCB (1)
4020 Part cooling fan and duct (1)
4010 Extruder cooling fan (1)
Hot-end mounting bracket NEW STYLE (1)
Titan Extruder Assembly (1)
Heat block (1)
64w Heater Cartridge (1)
0.4mm Volcano Nozzle (1) Hardened Steel or Plated Copper
Kraken/Chimera Throat (1) Bimetal titanium or Full Titanium**
Kraken/Chimera Titan backplate (1)
BL touch Module (1)
Titan idler Arm (1) Alloy*
PCB cover (1)
Bi-metal is great for PLA and also higher temperature Filament.
Titanium is great for mainly high temperature Filament, but can be used for PLA and Higher temperature material.
Please note that these are for X2 and Genius Pro. They will not fit X1 or Genius.
Remember to hot tighten the nozzle once you install on the printer.
**Be aware that the titanium heatbreak is slightly longer than the original and Bimetal titanium heatbreak, so you will need to adjust the standard Artillery Bl touch, this can be achieved by filing a groove in the Bl touch mount and / or adjust the screw in the top.
* alloy lever may be black or silver depending on stock levels. usually black.