Thermistor and 50w heater (SUIT P100 block),
1* 100k 3950 Cartridge Thermistor.
1* 50w heater cartridge.
TO suit the P100 block (not included), Correct connectors. suit X1 & Genius
it will work plug and play. But for best perfomance it requires a Marlin thermistor settings change. thermistor line from 1 to 13. and if you want 300c then you need to change max temp in the firmware to 320c (marlin has a 15-20c buffer)
Marlin
*13:100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
#define TEMP_SENSOR_0 13
https://github.com/MarlinFirmware/Marlin/blob/1.1....
(for best results we also recommend doing a PID tune)
NOT SUITABLE FOR Artillery ORIGINAL BLOCK.
Replacement parts for the newer P100 style cartridge block. P100 style block photo for guidance, not included.
Please be careful tightening the thermistor, the case is brass and only requires very light tightening otherwise it will deform.
For X2 or Gpro you may need to file the ABL SENSOR Plastic mounting bracket holes into slots to give adjustment.